This product requires the Onset Adapter: S-WCC-M003.
The Wind Monitor is an accurate and reliable wind sensor specifically designed for the rigors of the marine environment, that is compatible with Onset's line of research-grade weather stations, including the RX3000, U30-NRC, H21, and H22 systems. When paired with the S-WCC-M003 wind sensor adapter, it offers plug-and-play performance with Onset stations, eliminating the need for programming or complex wiring.
The wind speed sensor is a four blade helicoid propeller. Unique transducer produces a pulse signal without electrical contacts or slip rings. The wind direction sensor is a durable molded vane. Vane angle is sensed by a precision potentiometer housed in a sealed chamber. All materials are carefully selected for corrosion resistance and maximum durability in the harsh marine environment. Extremely durable ceramic bearings are used throughout. Stainless steel bearings are used throughout. Special waterproof lubricant further enhances reliability. The instrument mounts on standard 1 inch pipe.
In what environment does this sensor operate?
This sensor operates in an outdoor environment.
What measurements does this sensor support?
This sensor supports the following measurement: Wind
Cable from adapter housing that plugs into logger:‚ 3m (9.8 ft)
Adapter housing dimensions:‚ 19.6 cm(7.7 in) long, 2.7 cm (1.05 in) diameter
Screw terminals:‚ provided inside adapter housing for attaching cable from RM Young Marine Wind Monitor
Wind speed measurement range:‚ '0 to 50 m/s (0 to 111 mph)
Wind speed accuracy (adapter only):‚ 0.20 m/s (0.46 mph)
Wind speed resolution: 0.20 m/s (0.44 mph)
Wind direction range:‚ 0 to 355 degrees
Wind direction accuracy (adapter only):‚ 1.4 degrees
Wind direction resolution:‚ 1.4 degrees