The HOBO MX100 data logger requires the HOBOmobile App and a compatible mobile device. The system requirements for the HOBOmobile app can be found at the bottom of our HOBOmobile software page.
Onsets HOBO MX100 is a low-cost, splash-proof data logger that measures and transmits temperature data wirelessly to mobile devices via Bluetooth Low Energy (BLE) technology.
Ideal for a range of indoor monitoring applications, this self-contained wireless data logger lets you access temperature data anytime from your mobile device over a 100-foot range. And, it requires no dedicated equipment beyond a mobile device for configuring the logger or reading out data.
Onsets free HOBOmobile app for iOS makes it fast and easy to view temperature graphs, check the operational status of MX100 loggers, configure alarm notifications, and share data files.
- Set up and offload loggers wirelessly from your mobile device "€œ no internet, cables, or computer required
- Exceptional value for the convenience of a BLE communication logger
- Splash-proof design enables use in damp environments and spray-down applications
- Easy to deploy, offload, and share temperature data using free HOBOmobile app
- Visual alarms on the logger display and mobile app keep you notified of problems
- Set up and start monitoring in minutes!
In what environment does this data logger operate?
This data logger operates in an indoor environment.
What measurements does this data logger support?
The MX100 data logger supports the following measurement: Temperature
|Temperature Sensor (MX2201 and MX2202)
|-30° to 70°C (-22° to 158°F)
|±1.0°C from -30° to -5°C (±1.8°F from -22° to 23°F) ±0.5°C from -5° to 50°C (±0.9°F from 23° to 122°F) ±1.0°C from 50° to 70°C (±1.8°F from 122° to 158°F)
|< < 0.1°C (0.18°F) per year.
|6 minutes typical to 90% in open air moving 1 m/s, unmounted
|Logger Operating Range
|-30° to 70°C (-22° to 158°F)
|1 mW (0 dBm)
|Approximately 30.5 m (100 ft) line-of-sight
|Wireless Data Satandard
|Bluetooth Smart (Bluetooth Low Energy)
|1 second to 18 hours
|± 1 minute per month at 25°C (77°F)
|CR2450 3V lithium, not replaceable
|1 year, typical with logging interval of 1 minute and Power Saving Mode disabled; 2 years, typical with logging interval of 1 minute and Power Saving Mode enabled. Faster logging intervals, remaining connected with the app, excessive downloads, and paging may impact battery life.
|Full Memory Download Time
|Approximately 30 seconds; may take longer the farther the device is from the logger
|6.9 x 4.5 x 1.1 cm (2.71 x 1.76 x 0.42 inches)
|25.5 g (0.90 oz)
|The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- NIST-SETUP Setup Charge for NIST Traceable Certification
- NIST-TEMP-POINT NIST Temperature point Certification