HOBOware Pro is required for this product.
Conveniently offload data in the field with the HOBO U-Shuttle Data Transporter. This product also allows users to easily relaunch HOBO U-series data loggers and HOBO Weather Stations, Micro Stations, and HOBO Energy Logger systems. View readings on a 2 x 16-character display for selected data loggers, and access logger status for all loggers. An Optic USB Base Station is required for use with optic USB data loggers.Firmware Version 1.18
NOTE: HOBOware Pro software required.
- Fast and easy data retrieval
In what environment does this communication operate?
This communication operates in indoor and outdoor environments.
HOBOware Pro 2.2.0 or greater; USB cable (provided)
Compatible logger with appropriate cable and/or base station
Compatibility: All U-Series loggers, HOBO Weather Stations and Micro Stations (H21), and HOBO FlexSmart loggers (H22); not compatible with the HOBO Waterproof Shuttle (U-DTW-1)
Firmware upgrades: Available on the Onset website as needed to provide compatibility with future supported logger models
Operating temperature: 0° to 50°C (32° to 122°F)
Storage temperature:-10° to 50°C (14° to 122°F)
Time accuracy: ± 1 minute per month at 25°C (77°F); see Plot A
Logger-to-Shuttle Transfer Speed
USB/optic: 64K in approximately 30 seconds
Serial: 512K in approximately 60 seconds
Shuttle-to-host transfer speed: Full shuttle offload (4 MB) to host computer in 3 to 5 minutes, depending on computer
Data capacity (full loggers): 4 MB (minus 64 KB for shuttle information): enough for 504 readouts of 8K loggers, 63 readouts of 64K loggers, or 7 readouts of 512K loggers
Idle timeout: Shuttle powers down after two minutes of idle time, except when actively communicating with HOBOware or changing logger batteries (10 minutes)
RJ-12 jack for communicating with smart sensors
Mini-B full speed USB port for communicating with host computer
Full speed USB port for communicating with U-Series loggers and base stations
High speed serial port for communicating with serial loggers
Shuttle communicates with only one device at a time
Batteries main: 2 AA alkaline batteries
Clock backup: 1 CR1225 lithium battery (3 V)
Battery life main: One year or approximately 50 complete memory fills, typical use
Clock backup: 10 years typical use (with main batteries installed)
Weight: 153 g (5.4 oz)
Dimensions: 11.0 x 6.9 x 2.7 cm (4.35 x 2.70 x 1.05 inches)
Case materials: ABS case with urethane rubber grips, polycarbonate label
The CE Marking identifies this product as complying with the relevant directives in the European Union (EU).